LC Refiner Use: Conclusion

1. Allow an hour for flushing of pipes and clean-up
2. Turn on mixer for tank to be emptied to aid in moving the pulp
3. During tank unloading sometimes valves and corners in the pipes get plugged – running the pump back and forth a few times at 29 Hz can dislodge the blockage.
4. After filling tank A with some clean water, flush system 2x into tank B. When system is pumping clean water, actuate green valve to flush fibres from the ball valve. Play around with all other valves to clean them as well.
5. When discharging water from the tanks down the drain, first check the whole length of drain in HHR to make sure there aren’t any blockages that could cause flooding.
6. Sample data logged is saved in data_test folder on desktop. Retrieve your files and empty the folder for the next person.

LC Refiner Use: Preparation – Operation – Conclusion – Detailed Guidelines

Back to Training