2012
- L. P. Wittberg, M. Bjorkman, G. Khokar, U.-B. Mohlin, and A. Dahlkild. Flow conditions in the grooves of a low-consistency refiner. Paper Physics. (pdf)
- E.C.Xu, Synergistic effects between chemical mechanical pulps and chemical pulps from hardwoods. (pdf)
2011
- O. Eriksen and B. Roos. Mechanisms in the refining zone for developement of physi- cal properties of tmp fibres in a low-consistency refiner: Gap clearance and vibration measurements. Technical report, STFI-Packforsk. (pdf)
- J. Rantanen, E. Hiltunen, K. Nieminen, R. Kerekes, and H. Paulapuro. Construction of a single bar refiner. Tappi: Peer-Reviwed Pulping, pages 45–51. (pdf)
2010
- J.-F. Bloch, P. Nortier, and J.-C. Roux. Influence of the history of loading during beating on the evolution of the drainage resistance (sr). Paper Physics. (pdf)
2009
- J.-C. Roux, J.-F. Bloch, R. Bordin, and P. Nortier. The net normal force per crossing point: A unified concept for the low consistency refining of pulp suspensions. In 14th Fundamental Research Symposium, Oxford, UK. (pdf)
2008
- O. Eriksen, C. Holmqvist, and U.-B. Mohlin. Theoretical outline of the cause for ob- served cavitation in a low-consistency refiner. Nordic Pulp and Paper Research Journal, 23(3):315–320. (pdf)
- O. Eriksen, C. Holmqvist, and U.-B. Mohlin. Fibre floc drainage – a possible cause for substantial pressure peaks in low-consistency refiners. Nordic Pulp and Paper Research Journal, 23(3):321–326. (pdf)
- B. Prairie, P. Wild, P. Byrnes, D. Olender, B. Francis, and D. Ouellet. Forces during bar-passing events in low consistency refining: Distributions and relationships to specific edge load. (pdf)
2007
- O. Eriksen and L.-A. Hammar. Refining mechanisms and developement of tmp proper- ties in a low-consistency refiner. (pdf)
- T. Lundin, P. Fardim, and W. Batchelor. Estimation of fibre trapping from refiner loadability measurement. PPT Talk. (pdf)
- B. Prairie, P. Wild, P. Byrnes, D. Olender, D. W. Francis, and D. Ouellet. Forces during bar-passing events in low consistency refining: effects of refiner tram. Pulp and Paper Canada, 109(9):34–37. (pdf)
- H. Cui and J.R. Grace, Flow of pulp and fibre suspension and slurries: A review, Int. J. Multiphase Flow 33:921-934, 2007 (pdf)
2006
- W. C. Frazier. Refiner tram and its contribution to pulping and pulp movement in high consistency refiners. Machine Design. (pdf)
- H. Sixta. Handbook of Pulp. Wiley-VCH. (pdf)
- W. Batchelor, T. Lundin, and P. Fardim. A method to estimate fiber trapping in low-consistency refining. Tappi Journal, 5(8):31–36. (pdf)
2005
- T. Lundin and B. Lonnberg. Energy balance in low consistency (lc) refining. In 8th Pira International Refining Conference. (pdf)
- O. Eriksen and L.-A. Hammar. Measurement techniques suitable for the refining zone disc and conical lc refiners. (pdf)
2004
- T. Alahautala, E. Lassila, R. Hernberg, E. Harkonen, and P. Vuorio. Optical measure- ment of pulp quantity in a rotating disc refiner. Meas. Sci. Technol., 15:2256–2262. (pdf)
2003
- W. Batchelor and T. Lundin. Effect of consistency and refiner speed on bar coverage in refining. In PowerPoint Talk. (pdf)
- T. Lundin. Bar clearance developments in laboratory lc refining. In PowerPoint Talk. (pdf)
- U. B. Mohlin. On the complexity of lc refining: changing consistency and flow rate in the beloit dd refiner.(pdf)
2001
- J. Senger and D. Ouellet. Factors affecting the shear forces in high-consistency refining. (pdf)
1998
- J. Lumianen. Redining of chemical pulp, chapter 4. (pdf)
1996
- T. Alahautala, J. Vattulainen, and R. Hemberg. Quantitative visualization of pulp refining in a production line refiner. (pdf)
1992
- J. Lumiainen. Refini ag. recycled fibers: advantages and disadvantages. Tappi, pages 92–97. (pdf)
- M. I. Stationwala, D. Atack, and A. Karnis. Distribution and motion of pulp fibres on refiner bar surface. Journal of Pulp and Paper Science, 18(4):J131–J137. (pdf)
1990
- J. Lumiainen. New theory can improve practice. (pdf)
1989
- D. H. Page. The beating of chemical pulps – the action and the effects. (pdf)
1981
- L. Nordman, J.-E. Levin, T. Makkonen, and H. Jokisalo. Conditions in an lc-refiner as observed by physical measurements. Paperi ja Puu – Papper och Tra, (4):169–180. (pdf)
- A critical review of current theories for refining of chemical pulps. Project 3384, Report III. (pdf)
1979
- Pulp transport in the disk refiner. Project 3384, Report II. (pdf)
- T. Fox, R. Brodkey, and A. Nissan. High-speed photography of stock transport in a disk refiner. Tappi, 62(3):55–58. (pdf)
1978
- High speed photography of the disk refining process. Project 3384, Report I. (pdf)
1977
- P. J. Leider and A. H. Nissan. Understanding the disk refiner. Tappi, 60(10):85–89. (pdf)
1968
- W. Herbert and P. G. Marsh. Mechanics and fluid dynamics of a disk refiner. Tappi, 51(5):235–239. (pdf)
1967
- W. Banks. Design considerations and endineering characteristics of disc refiners. Paper Technology, 8(4):363–369. (pdf)
1962
- J. Lewis and D. W. Danforth. Stock preperation analysis. Tappi, 45(3):185–188. (pdf)